If you own a Wireless & Wired controller, switch the Wireless/Wired Switch to the left (USB). Connect the Micro-USB end of the cable to the Micro-USB port on the back of your controller. Connect the other end of the cable to one of the USB ports on your PS4™ console. Press the PS Button on your SCUF Vantage 2. Wireless Mode (Bluetooth) Select "Bluetooth Devices." On your new controller, press and hold down the PS and Share buttons for about five seconds. Your controller will appear on your PS4's screen. Select it to pair it. Your new controller is now paired with your PS4, and you can use it to play your games and perform other tasks on your console. First, start ds4 windows. you need to install some drivers for it. after that you need to get your controller into pairing mode "share-button"+"ps-button" hold it till your controller blinks white. then, search for bluetooth devices over windows 10 configs (bluetooth dongle has to be inserted) after that, the tool should add the controller in Quick guide on how to pair a PS4 Controller (or PS5 Controller) with a Windows PC over Bluetooth/Wirelessly the EASY WAY. Just plug the controller into your To pair the DS4 with your computer, first put the controller into pairing mode by press and HOLDING the Playstation button and Share button at the same time. Hold these buttons until the light bar starts rapidly flashing. Then go into your bluetooth menu and chose "Add Device". To connect via Bluetooth, follow these steps: Use a USB cable to connect your PS4 Dualshock controller. Press the Windows Start button and go to “Settings.”. Click on “Devices” and enable Bluetooth, then “Add Bluetooth device.”. Select “Bluetooth,” find your PS4 Dualshock wireless controller, and pair it with your PC. 如何配對DUALSHOCK 4無線控制器和支援的裝置. 若是初次使用藍牙配對支援的裝置與無線控制器，請開啟配對模式。. 確認控制器上的玩家指示燈已熄滅。. 若玩家指示燈處於亮起狀態，請按住PS按鈕直到燈熄滅為止。. 若控制器上已連接USB，請將其卸除。. 按住SHARE Bluetooth must be activated on the computer so that the connection between the PC and the hardware can be established. To do this, first open the “Settings” and select “Devices” there. The Bluetooth function appears at the top of the menu and is activated by clicking on it. Bluetooth must be enabled to connect to the controller. qGtIbj.